Amd Athlon Ii X2 250 Übertakten

• #2

use the bios when OCing. yous can apply those softwares to get you in the brawl park merely they are not stable in the long run. you need to talk to JrRacinFan nigh this. he has this aforementioned chip and could tell you all well-nigh OCing it. I will direct him to this thread.

• #3

Ok don't touch Whatsoever voltages. Switch AI tuner to manual, drop your ram speed to 667 and start increasing HT speed. That'south just the basics and pretty much all in that location is to information technology. Close to all X2 2x0 chips overclock to 250-270 ht speed, and most X2 250's go to ~3.6Ghz, I accept seen quite a few do 4Ghz 24.vii also.

Equally far as cpu temps and voltages are concerned to go on information technology more than safe for 24.vii usage, dont become above i.55v and 55C.

• #6

Not HT Link, HT speed AKA FSB. ^^ See above it may also be known in your bios every bit CPU frequency.

• #8

My 240 does 3.5GHz at stock voltage.

Furthest I got mine is 262ht for 3.66Ghz on stock voltage with a CM Hyper TX3. H2o didnt change a affair.

cdawall

where the hell are my stars

• #nine

i got 4.2ghz on my AX2 250 with coolermaster v10

• #12

That would be more than plenty. Not overkill simply would do fine.

I dunno. wouldnt you desire a heatsink with replacable 120mm fans for perhaps a push/pull combo?

• #13

I dunno. wouldnt you want a heatsink with replacable 120mm fans for maybe a push button/pull combo?

That would be optimal but Athlon II X2 series runs very cool. I mean the 240 I had running on stock cooling and @ 3.3Ghz i.33v would never saw 40C load.

• #16

That can usually be set in the hardware monitor section of the bios. It could be labeled as something else simply in mine it's known equally smart fan.

• #19

Hmm, I run mine at 270x13 at stock voltage so I could play with the memory. I judge I'll try 13.5 and see if it will take me to 3645MHz... heh

Very good possibility it will. I do know that when I had information technology on the 790FX UD5P it would get up to 262 then dice after that,leaving a BSOD while windows booting at 263. As well do know that wasn't a crap board but then again it was rather picky with the ram I had.

Concluding edited: Jul 2, 2010

Amd Athlon Ii X2 250 Übertakten,

Source: https://www.techpowerup.com/forums/threads/amd-ii-x2-250-3-0-ghz-overclock.125728/

Posted by: simmonshemple.blogspot.com

Share this post